Bison Poly Max High Tack Express Cartridge 425G

Bison Poly Max® High Tack Express Cartridge 425 g (BIS-6300808)

• Very high initial bond strength
• The super-fast building of final bonding strength
• Very high final bond strength
• Can be used internally and externally
• Resistant to temperatures between -40°C and +100°C
• UV, water and all-weather resistant
• 100% adhesive (non-shrinking)
• Also bonds to slightly damp surfaces
• Excellent bonding without primer
• Acid-free, odourless

Instruction to Use:

• Bonding and fixing: Apply in stripes or dots (every 10 - 40 cm). Always apply to the corners and along the edges of construction boards. Correctly position material within 10 minutes and press firmly or lightly tap with a rubber mallet. If necessary, clamp or fixate heavy materials for 4 hours. Can be handled after 30 minutes (the connection is now strong enough to withstand transportation or a light load); maximum final strength after approx. 4 hours, depending on the surface and the ambient conditions.
• Sealing: Evenly apply to the bottom of the joint and tool within 10 minutes using a moistened (with soapy water without lemon) putty knife, sealant smoother, or finger. Tool the vertical joints from bottom to top. Fully cured after a few days (depending on the thickness of the layer). When painting over with alkyd paint, the paint may dry more slowly.

Storage conditions:

Close container properly and store in a dry, cool and frost-free place.