Bison Vinyl Plastic Blister 25ml

Bison Vinyl Plastic Blister 25 ml (BIS-6305320)

• Transparent
• Waterproof
• Flexible

Instruction to Use:

• Not to be applied at temperatures below +10°C.
• When gluing overlapping parts: Apply glue thinly to the entire surface of both sides. Let dry for 5-20 minutes. The glue should be dry to the touch. Drying time depends on the nature of materials and on temperature. Join parts and press or tap firmly. After joining, parts stick immediately! Final bond strength depends on pressure, therefore exercise as much pressure as possible on the entire surface.
• When gluing parts which will be reinflated later on: (inflatable boats, swimming belts, beach balls, etc.), let glue connection dry for at least 6 hours before reinflating objects.
• When gluing tears and holes: use scissors to cut a piece off the repair pad enclosed with the object. The piece must be greater than the tear/hole to be repaired. The larger the overlap, the stronger the connection. Then follow the instructions for 'overlapping parts'.

Storage conditions:

Store in a dry, cool and frost-free place.