Bison Silicone Universal White Cartridge 280ml

Bison Silicone Universal White Cartridge 280 ml (BIS-6306987)

• (Sea)water resistant
• Permanently elastic
• UV and all-weather resistant
• Mould resistant, Chemical resistant
• Excellent bonding on all surfaces
• Resistant to temperatures between -50°C and +120°C

Instruction to Use :

• Ensure a minimum joint width of 6 mm and a maximum of 20 mm. The joint depth depends on the joint width. Keep a joint depth of 6 mm up to a joint width of 12 mm. Beyond that, the joint depth should be half the joint width. Inject the sealant evenly into the joint and tool within 10 minutes with a putty knife, moistened with a soap solution. Remove the applied masking tape immediately after tooling. After approx. 15 minutes, surface skin will form.
• Points of attention: Silicone hardens under the influence of humidity. Contact with humidity is therefore absolutely necessary during curing. Always consider a joint of at least 6 mm wide.

Storage conditions:

Store in properly sealed packaging in a dry place at between +5°C and +25°C.