Bison Epoxy Universal Blister 24ml

Bison Epoxy Universal Blister 24 ml (BIS-6305437)

• Super-strong (up to 170 kg/cm²)
• Resistant to temperatures between -30°C and +80°C
• Water-resistant & Chemical resistant

Instructions to Use:

• Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a synthetic spatula until a mixture is obtained with a homogeneous color. Apply the mixture, which at room temperature (+20°C) remains tool able for about 1.5 hours, as a thin layer on one of the two materials. Join the materials and keep them in place for 7 hours. Be careful not to move the parts before the adhesive has cured. After use, clean the nozzle with a cloth and place the special cap in the handle on the double syringe. Resin and hardener must not come into contact with each other unless for usage.
• Points of attention: After use close well (note: always place back the cap in the same way, due to the bonding of the cap to the double syringe). For optimum performance, it is important to create a larger amount of adhesive and mix it very well. Curing time depends on temperature. The adhesive does not cure below +5°C.

Storage conditions:

Store cool, dry, frost-free, upright (nozzle upwards) and tightly closed.