Bison Silicone Universal Transparant Card 60ml

Bison Silicone Universal Transparant Card 60 ml (BIS-6305452)

• Permanently elastic
• UV and all-weather resistant
• Mold resistant & Chemical resistant
• Excellent bonding on all surfaces
• Resistant to temperatures between -50°C and +120°C

Instructions to Use:

• Screw the cap from the tube and pierce the tube membrane with the point at the top of the cap in a twisting movement. Screw synthetic nozzle onto the tube and then cut diagonally. Inject the sealant evenly into the joint, then within 10 minutes tool with a putty knife or other tool, moistened with a soap solution.

• Points of attention: Silicone hardens under the influence of humidity. Contact with humidity is therefore absolutely necessary during curing. Always consider a joint of at least 6 mm wide. By applying masking tape along the joints completely smooth seams are achieved, remove the tape immediately after smoothing.

Storage conditions:

At least 18 months after production. Limited shelf life after opening. Store in properly sealed packaging in a dry place at between +5°C and +25°C.