BigRed Cantilever Tool Box With Six Tray - Red

Big Red Cantilever Tool Box With Six Tray - Red

The toolbox is suitable for home storage, garage storage, suitable for both DIY and professionals users. High quality 100% plastic, metal clasp lock, and plastic panel with professional Riveting Process whole box are light-weighted, strong, easy carrying.

• Plastic&Stainless steel material, super durability.

• With large space and good for different kinds of tools packing.

Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have the necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use a cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and looks under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided shall be followed.

4. Temperature - When equipment is used at temperatures above 140 degrees F (60 degrees C) or below -20 degrees F (-29 degrees C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of equipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment is used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.