Sonax Profiline Cut And Finish 1Litre

SONAX PROFILINE CUT AND FINISH 1litre

SONAX Cut & Finish is an innovative polish with an intense abrasive effect for quickly eradicating defective spots, such as dust occlusion, paint overspray and sanding marks following repair spraying. High abrasion with simultaneous good degree of shine, workable for a long time, with outstanding wipe off feature. Ideal for polishing sanded down surfaces. Removes sanding grooves made by P1500 abrasive paper. Silicone-free.

SONAX Cut & Finish has an intense abrasive effect for quickly eradicating gloss-hindering paint defects, such as dust occlusion, paint overspray, water spots, and sanding marks. The polish has a high abrasion level with an incredible gloss rating that truly puts it in a league of its own. SONAX Cut & Finish is the compound you’ve been searching for!
Not only does SONAX Cut & Finish offer an incredible amount of cut for the finish it creates, it’s easy to use as well! You’ll especially appreciate the long working time and the outstanding wipe off. SONAX Cut & Finish is also one of the best values on the market.

If you’re looking to eliminate steps without sacrificing performance, SONAX Cut & Finish is the compound you’ve been dreaming of!

Directions for use:

• If necessary, sand the paint beforehand with P1500 (or finer) sandpaper.
• Use the speed-adjustable rotary polishing machine with foam pad hard 160 or foam pad medium 160.
• Apply a small amount (3 or 4 Dime-sized drops) of polish onto the SONAX Polishing Pad.
• Polish the surface at a low rotating speed (800 rpm) for approximately 20-30 seconds, applying 15-20 pounds of pressure.
• Then place the pad flat and perform several short polishing steps, especially on fresh paint.
• After 30 seconds, remove pressure completely using only machine weight, increase machine speed (1200 RPM) and continue polishing for 45-60 seconds.
• When finished polishing, wipe down the paint surface with a SONAX Ultra-fine Microfiber Cloth.
• Optional and depending on the color, SONAX PerfectFinish can be used to polish to a perfect high gloss.

Please note:

• Do not overheat the polishing point.
• Clean polishing pads regularly and never use different polishing agents on one pad.
• Protect from frost.
• Keep out of the reach of children.

Specifications:

• Origin: Germany
• Material: Polish
• Product Size: 1000ml

Scope of delivery: 1x SONAX PROFILINE CUT AND FINISH 1litre