Bison High Temp Fire Place Sealant Cartridge Black (1250 Deg

Bison High Temp Fire Place Sealant Cartridge Black (1250 deg) (BIS-1832020)

• Heat resistant up to 1250ºC
• Forms a tough seam
• Fire-proof sealing

Instruction to Use :

• Slightly moisten the joint with water before applying. Inject the sealant evenly into the joint and tool immediately with a wet putty knife. Allow drying for at least 24 hours. Then heat gently until the sealant has cured. For exhaust systems, first apply a layer of sealant, press in a piece of fiberglass cloth, and cover it again with sealant. Allow drying for at least 24 hours. Remove excess sealant immediately with water.
• Points of attention: Thermal loading of the sealant when it is not yet entirely cured may result in the forming of tears and even to crumbling of the sealant. After some time, a liquid film will form on the sealant, but this has no effect on the quality of the sealant.

Storage conditions:

Store upright and well-closed at a temperature between +5°C and +25°C.