BigRed Hydro Floor Jack 2Ton

Bigred Body Repair Hydraulic Jack with Blow Mold & Storage Box 2 Ton - Red

• Important!

  Before attempting to rise a vehicle, check the vehicle service manual for recommended lifting surfaces.

  To raise load :

  • Close release valve tightly (by turning the handle clockwise) DO NOT OVERTIGHTEN.

  • Position jack under load so that saddle will contact load firmly and load is centered so it cannot slip.

  • Operate jack handle until saddle approaches the load.

  • Once again check to see that saddle is correctly positioned.

  • Raise load to the desired height.

  • Place jack stands of appropriate capacity under the vehicle.

  • DO NOT CRAWL UNDER VEHICLE WHILE LIFTING VEHICLE OR PLACING OR REMOVING JACK STANDS!

  • Place jack stands at the vehicle manufacturer's recommended lift areas that provide stable support for the raised vehicle.

  To Lower Load :

  • Open release valve VERY SLOWLY (by turning the handle counterclockwise).

  • When the release valve is opened, saddle and load will be lowered.

  • Lower the vehicle slowly so as not to shock load the jack stands.

  • Once repairs are completed, raise the vehicle enough to remove jack stands.

  • Lower vehicle very slowly.

  CAUTION: Keep hands or feet away from the hinge mechanism of the jack.

Includes :

• 1 psc Saddle

• 1 psc SUV Saddle

• 1 psc Front Wheel Assembly

• 1 psc Handle Fork

• 1 psc Release Valve

• 1 psc Handle Assembly

• 1 psc Power Unit Assembly

• 1 psc Rear Caster Assembly