ABRO HEAVY DUTY STOP LEAK POWDER

POWDER STOP LEAK 20g. Plugs Pin Hole Size Radiator Leaks and Prevents Seepage Simple Pour-In Application STOPS LEAKS FAST Carefully formulated to mix with the hot water and anti-freeze in a vehicle's cooling system. Tiny fibers and pure metal particles seek out the pinhole leak and are "welded" together by sealing resins which harden with the heat of the engine to form a permanent seal. PREVENTS LEAKS Recommended to prevent leaks in rebuilt or replaced engines, radiators, or heaters, or when replacing engine gaskets, intake manifolds, water pumps or freeze plugs. How to use: Radiator must be filled to the proper level and free of scale. With the engine warmed up and running, pour ABRO STOP LEAK slowly into the radiator. Replace the radiator cap and run the engine at fast idle with the heater on for 10-15 minutes. The leak is sealed. The tube contains a fine powder with trace metal-be careful not to breathe, and to be added to the coolant reservoir with engine warm and running, and then leave the engine running for 10 to 15 minutes.

• Plugs Pin Hole Size Radiator Leaks and Prevent Seepage
• Simple Pour-In Application
• Carefully formulated to mix with the hot water and anti-freeze in a vehicle's cooling system.
• Tiny fibers and pure metal particles seek out the pinhole leak and are "welded" together by sealing resins which harden with the heat of the engine to form a permanent seal.

Direction for use :

• The radiator must be filled to the proper level and free of scale.
• With the engine warmed up and running, pour ABRO STOP LEAK slowly into the radiator.
• Replace the radiator cap and run the engine at fast idle with the heater on for 10-15 minutes.
• The leak is sealed.